Cable Runway E-Bend, 12 in.W x 1.5 in.H x 27 in.L, Black, Cable Capacity - 947

Creates a gradual bend in horizontal cascading cable runs and a gradual sweep in horizontal planes of Cable Runway runs. Designed for cabling in conformance with the minimum bend radius requirements (typically 4 times the cable diameter). Made of lightweight 1-1/2 in. x 3/8 in. (39.1mm x 9.53 mm) tubular steel to fit a standard Cable Runway.

Key Features and Benefits

8226;Made of lightweight 1-1/2 in.

x 3/8 in.

(38.1 mm x 9.53 mm) tubular steel

8226;Cross members welded at approximately 23 degree increments

8226;Outside/Inside is determined by welding cross members closer to cable side

8226;Only gold radius bends are UL Classified

There are currently no resources for this product.